--Getting the Most of Your Pocket PC Experience!

Frequently Asked Questions
Introduction
Step 1. Tools and Warnings
Step 2. Opening the Device
Step 3. Removing the ROM
Step 4. Some more Screws.
Step 5. Removing the Ribbon Cables
Step 6. More Ribbon Cables!
Step 7. Preparing to Overclock.
Step 8. Overclocking With The Pencil
Step 9. Tips On Reassembly.
Step 10. Testing Results!
Want Me To Do it For You?
Overclock Your EM-500-Guide By Fayle
Overclock Your E-125-Guide By Fayle
 
 

Step 7. Preparing to Overclock

You should now get your pencil ready to go! The overclocking is fairly simple from here, but you will be working with a very small area! You need to familiarize yourself with the backside of the main board! The picture below should help!

The topside of the board conatins the processor, as shown above. You will need to peel back the black plastic tape that is covering the upper portion of the board. Be carefull not to rip it as I did!

The picture above will show you where to look for the clock selector pins. There are three of them! Learn how to overclock in the next step!